10 In. Dia Keepa Vent an Aluminum Static Roof Vent for Flat Roofs in Black

Description

Aluminum roof vent best for low slope or flat roof ventilation
Can be used as both air intake or exhaust
UL Certified & tested to withstand wind pressure speeds 200+ mph
Our Keepa Roof Vents remove heat and moisture from the attic with no moving parts. Our UL certified Keepa Vent is tested to withstand wind pressure speeds up to 200 mph. Its standard 11 in. collar height is great for flat roof applications, especially for locations that accumulate high levels of snow or rain fall. Can be used as an air intake or exhaust roof vent. These vents have an all aluminum construction, which means it is durable, lightweight, and it WILL NOT RUST. Our Keepa Roof Vents have inner vertical louvers with an 1/8 in. Dia opening, thus maximizing air flow without letting in insects or animals. These are better than insect screens that clog up easily. And unlike your typical whirly-bird turbine vents, our keepa vents are not open to the sky, which prevents rain and snow from entering. The louver blades and noncombustible material meet the requirements of California building code 706A.2 Vents to resist the intrusion of burning embers and flame through ventilation openings.
Best used for flat roof attic ventilation
Net free air space: 78 sq. in. (0.55 sq. ft.)
Pitch capacity range: 0/12 to 12/12
Ventilation rule 1:300: 1 vent per 327 sq. ft.
Built-in inner vertical louver cylinder that keeps out insects, birds, and animals while allowing air to move through the vent without resistance
Built-in inner vertical louver cylinder has a 1/8 in. opening between the louver blades and all aluminum (noncombustible) material meets the requirements of California building code 706A.2 vents to resist the intrusion of burning embers and flame through ventilation openings
5-year warranty