Hylomar Hylogrip HY5172 Anaerobic PTFE Thread Sealant 250 Ml 8.45 Fl Oz 61819

Description

HYLO®GRIP HY5172 thread sealant was
specifically formulated and developed for
the sealing and locking of threaded joints
and other sealing applications.
HYLO®GRIP HY5172 contains PTFE and can
considerably ease torque-up of threaded
joints.
Description:
Hylogrip HY5172 thread sealant was
specifically formulated and developed for
the sealing and locking of threaded joints
and other sealing applications. The
products are resistant to heat,corrosion,
vibrations, water, gases, oils,
hydrocarbons and many other chemicals.
The lubricating properties of Hylogrip
HY5172 are due to the PTFE content of
the products and can considerably ease
torque-up of threaded joints.
Instructions for Use:
For best results ensure the surfaces to
be sealed are clean, dry and free from
contamination such as oil or grease.
Surfaces may be cleaned using a suitable
solvent such as acetone. Sufficient
product to fill the threads should be
applied before assembly. Any accessible
residue can be easily wiped away using
acetone.
The joint should be left undisturbed for
about one hour, after which it can be
safely handled. Full joint strength is
achieved after twenty-four hours,
although under certain circumstances
pressure testing may be carried out
earlier than this. When a more rapid
cure is required, or when used on non-
metallic components, a layer of Hylomar
Anaerobic Primer should be applied to
one of the surfaces to be bonded, and
allowed to dry (which only requires a
few minutes), assembly is then as before.
Typical applications:
Hylogrip HY5172 thread sealant may be
used as a sealing and locking compound
on all types of pipe threads. The product
is superior to P.T.F.E. tape, which can
become detached and cause operating
problems in control systems requiring a
high level of particulate cleanliness.
Hylogrip HY5172 has proved extremely
effective on stainless steel pipe threads,
operating successfully where other
compounds of this type have failed to
perform satisfactorily. This makes them
particularly useful in the construction of
hydraulic control systems for the offshore
industry, where stainless steel pipework
and components are widely used and
joint integrity is vital.
Because the compound cures within the
joint, it not only prevents leakage from
within the pipework, but also excludes the
surrounding environment from the joint
surface. This helps to reduce the likelihood
of crevice corrosion taking place, especially
where the joint is immersed in sea water.
Powered by SixBit's eCommerce Solution